西门子授权PLC模块代理商/触摸屏中国一级代理商
TULTRAMAT 6 型单通道或双通道红外气体分析仪，采用交变 NDIR 双光束测量原理，具有高度的选择性，测量那些红外吸收波段在 2~9 µm 范围内的气体，例如：CO，CO2, NO, SO2, NH3, H2O as well as CH4 以及其它碳氢化合物。
单通道分析仪可同时测量多 2 个气体组分，而双通道分析仪可同时测量 3 个（或 4 个，根据要求）气体组分。
High selectivity with double-layer detector and optical coupler
Reliable measurements even in complex gas mixtures
Low detection limits
Measurements with low concentrations
Corrosion-resistant materials in gas path (option)
Measurement possible in highly corrosive sample gases
Analyzer cells can be cleaned as required on site
Cost savings due to reuse after contamination
Electronics and physics: gas-tight isolation, purging is possible, IP65
Long service life even in harsh environments
Heated versions (option)
Use also in presence of gases condensing at low temperature
Ex(p) for Zones 1 and 2 (in accordance with to ATEX 2G and ATEX 3G)
Measurement for boiler control in combustion plants
Emission measurements in combustion plants
Measurement in the automotive industry (test benches)
Warning equipment
Process gas concentrations in chemical plants
Trace measurements in pure gas processes
Environmental protection
TLV (Threshold Limit Value) monitoring at the workplace
Quality monitoring
Ex versions for analyzing flammable and non-flammable gases or vapors for use in hazardous areas
Special versionsSpecial applications
Besides the standard combinations, special applications concerning material in the gas path, material in the sample chambers (e.g. Titan, Hastelloy C22) and measured components are also available on request
Performance-tested version / QAL
For measurements of CO, NO, SO2 and O2 according to sections 13 and 27 of the German Federal Immission Protection Regulations and TA Luft, performance-tested versions according to EN 15267 are available.
Certified measuring range:
1-component analyzer
CO: 0 to 75 mg/m³; 0 to 10 000 mg/m³
NO: 0 to 100 mg/m3; 0 to 10 000 mg/m³
SO2: 0 to 75 mg/m3; 0 to 1 500 mg/m³
O2: 0 to 5 vol.%; 0 to 25 vol.%西门子授权PLC模块代理商/触摸屏中国一级代理商
In addition, performance-tested versions of the ULTRAMAT 6 meet the requirements set forth in EN 14956 and QAL1 according to EN 14181. Conformity of the analyzers with both standards is TÜV-certified.
Determination of the analyzer drift according to EN 14181 (QAL3) can be carried out manually or also with a PC using the SIPROM GA maintenance and servicing software. In addition, selected manufacturers of emission evaluation computers offer the possibility for downloading the drift data via the analyzer's serial interface and to automatically record and process it in the evaluation computer.
Flow-type reference cell西门子授权PLC模块代理商/触摸屏中国一级代理商
The flow through the reference cell should be adapted to the sample gas flow
The gas supply of the reduced flow-type reference cell should have a primary pressure of 3 000 to 5 000 hPa (abs.). The flow is then automatically regulated at approximately 8 ml/min using a restrictor
设计
19" rack unit with 4 U for installation
In hinged frame
In cabinets with or without telescopic rails
Front plate can be swung down for servicing purposes (laptop connection)
Internal gas paths: hose made of FKM (Viton) or pipe made of titanium or stainless steel
Gas connections for sample gas inlet and outlet: pipe diameter 6 mm or 1/4"
Flow indicator for sample gas on front plate (option)
Pressure switch in sample gas path for flow monitoring (option)
Field device西门子授权PLC模块代理商/触摸屏中国一级代理商Two-door enclosure with gas-tight separation of the electronics modules from parts conveying gas
Individually purgeable enclosure halves
Parts in contact with sample gas can be heated up to 65 °C (option)
Gas path: hose made of FKM (Viton) or pipe made of titanium or stainless steel (further materials possible as special applications)
Gas connections for sample gas inlet and outlet: pipe union for pipe diameter 6 mm or 1/4"
Purging gas connections: pipe diameter 10 mm or 3/8"
Display and operator panelLarge LCD panel for simultaneous display of:
西门子授权PLC模块代理商/触摸屏中国一级代理商ys)
Status bar
Measuring ranges
Contrast of LCD panel adjustable using menu
Washable membrane keyboard with five softkeys
Menu-driven operation for parameterization, test functions, adjustment
User help in plain text西门子授权PLC模块代理商/触摸屏中国一级代理商
Graphic display of concentration trend; programmable time intervals
Bilingual operating software:
German/English, English/Spanish, French/English, Italian/English, Spanish/English
One analog output per medium (from 0, 2, 4 to 20 mA; NAMUR parameterizable)
Two analog inputs freely configurable (e.g. correction of cross-interference or external pressure sensor)
Six digital inputs freely configurable (e.g. for measuring range switchover, processing of external signals from sample preparation)
Six relay outputs freely configurable e.g. for fault, maintenance demanded, limit alarm, external solenoid valves
Expandable with eight additional digital inputs and eight additional relay outputs e.g. for autocalibration with up to four calibration gases
CommunicationRS 485 present in the basic unit (connection at the rear; for the rack unit also behind the front plate).
Options西门子授权PLC模块代理商/触摸屏中国一级代理商
AK interface for the automotive industry with extended functions
RS 485/RS 232 converter
RS 485/Ethernet converter
RS 485/USB converter西门子授权PLC模块代理商/触摸屏中国一级代理商
Connection to networks via PROFIBUS DP/PA interface
SIPROM GA software as the service and maintenance tool
TULTRAMAT 6 型单通道或双通道红外气体分析仪，采用交变 NDIR 双光束测量原理，具有高度的选择性，测量那些红外吸收波段在 2~9 µm 范围内的气体，例如：CO，CO2，NO，SO2，NH3，H2O 和 CH4 以及其它碳氢化合物。
单通道分析仪可同时测量多 2 个气体组分，而双通道分析仪可同时测量 3 个（或 4 个，根据要求）气体组分。
西门子授权PLC模块代理商/触摸屏中国一级代理商
双层检测器和光耦合器，选择性好
对复杂的气体混合物也能可靠测量
检测极限值低
可测低浓度
气路采用耐腐蚀性材料（可选）
可用于测量强腐蚀性样气
在现场可按要求清洁分析仪单元
由于污染后可以重新使用，因此可节约成本
电气和物理特性：气密隔离，可以吹扫，防护等级 IP65
即使在恶劣环境中，也具有很长的使用寿命
加热型（可选）
可在低温下有冷凝气体的情况下使用
Ex(p) 防爆，用于 1 区和 2 区（根据 ATEX 2G 和 ATEX 3G）
西门子授权PLC模块代理商/触摸屏中国一级代理商
